Kee Klamp Crossover Coupling

Home
Kee Klamp Rail Fittings
Kee Klamp
145 Crossover Coupling

145 Crossover Coupling

Price:

$16.00

SKU:

145-7

Brand:

Kee-Klamp

Weight:

1.85 LBS

Product Description

This fitting is designed to give a 90 degree offset crossover. As there are two socket set screws in the sleave, this KEE KLAMP fitting can be used where a join is required in the horizontal pipe. For economy, it is possible to use a Type 45 in place of the Type 145, where a join in the pipe occurs. When calculating the cutting lengths for the pipe, dimension "G" should be added to give the pipe length for the upright.

Note: To obtain the true height of the upright the allowance for the base fittings must be included.

Fitting Type	Bore Size	Pipe A	Pipe B	Dimension D	Dimension E	Dimension F
145-7	1-1/4”	7	-	1.81”	4.02”	1.93”

Fitting Type	Dimension G
145-7	.91”

Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Pipe Reference	Component Inner Dia	Nominal Bore	Pipe Outer Dia	Tube Outer Dia
2	.59”	1/4"	.54”	.531”
3	.76”	3/8”	.675”	.688”
4	.87”	1/2"	.84”	.844”
5	1.09”	3/4”	1.05”	1”
6	1.38”	1”	1.315”	1.313”
7	1.72”	1-1/4”	1.66”	1.625”
8	1.94”	1-1/2”	1.9”	1.875”
9	2.41”	2”	2.375”	2.375”