One part of a Type C52 combination fitting. This fitting can also be used for attaching flat panels to tubular structures.
![]() |
![]() |
Fitting Type | Bore Size (Inside of Pipe) |
Pipe A (Schedule 40) |
D | E | F | Bold Hole Dia. |
M52-5 | 3/4" | 5 | 1.57” | 1.57” | .75” | .39" |
M52-6 | 1” | 6 | 1.69” | 1.57” | .75” | .39" |
M52-7 | 1-1/4” | 7 | 1.89” | 1.85” | .75” | .39" |
M52-8 | 1-1/2” | 8 | 2.13” | 1.85” | .75” | .39" |
Pipe For Your Structure |
Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials. Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure. A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench. |