L26 - Two Socket Cross Kee Lite Fitting

(1 review) Write a Review
0.37 LBS
Calculated at Checkout
L26 - Two Socket Cross Kee Lite Fitting

Usually paired with Type L25 to give a 90 degree joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

kee-lite-l26.jpg kee-lite-l26-drawing.jpg


Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
L26-6 1” 6 1.67” 2.20” 4.09”
L26-7 1-1/4” 7 2.09” 2.52” 5.12”
L26-8 1-1/2” 8 2.36” 2.76” 5.83”
L26-9 2” 9 2.91” 3.23” 7.09”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos

1 Review Hide Reviews Show Reviews

  • 4
    Excellent product

    Posted by Unknown on 30th Nov 2014

    This is the first time I dealt with the Kee lite products. I'm impressed. Installation was a breeze and I was able to adjust the pipes accordingly. The fitting itself is very light and easy to work with.
    I would definitely use this product again.