48”D x 58”W Pallet Rack Wire Decks

(No reviews yet) Write a Review
29.00 LBS
Calculated at Checkout
Nashville Wire Decking


Model No.


Number of Channels

Load Cap.


48”D x 58”W


2,500 lbs.


Complete Your Warehouse Rack With Wire Decking From Nashville Wire...

To calculate the right size, determine your pallet rack frame depth, and your pallet rack beam width.  The depth of the frame is the depth of the wire decking needed however, to figure out the width take the actual beam length and divide it by two. Then subtract two from that number. Example: 108" long beam ÷ 2 = 54" - 2" = 52". On the 108" beam two 52" wide decks will be needed. Note that on a 12'(144") beam you will use 3 wire decks per level. 


Easy to install, simply drops into place.  Improves fire safety by enhancing the performance of your overhead sprinkler system.  Protects employees and products.  Improves inventory visibility and brightens your facility. Self-cleaning / maintenance free.  Gives you the flexibility to store cartons, drums, and multiple pallet sizes

Nashville Wire Decking is made of 6 gauge wire for better strength and rigidity, than the competition.  Support channels set on the inside beam step.  Designed for pallet rack beams that have a 1" x 1-5/8" inside step.  

Nashville Wire Products welded-wire decking for rack storage is designed and manufactured in conformance with ANSI standard MH26.2 for loads that are static and uniformly distributed over the entire surface of the rack deck and within the allowable load capacity rating. Users shall not permit welded-wire rack decking to be used as a walkway or platform for personnel. Loads should be placed onto decking rather than dropped or pushed. FAILURE TO ADHERE TO THESE GUIDELINES COULD RESULT IN SERIOUS INJURY.



Click Here To Order Corrugated Steel Pallet Rack Decking