40 - Four Socket Cross Kee Klamp Fitting

(No reviews yet) Write a Review
0.59 LBS
Calculated at Checkout
40 - Four Socket Cross Kee Klamp Fitting

Most frequently used in multiple upright structures to tie a center upright with horizontal pipes in four directions. The upright passes through the fitting.

kee-klamp-40.jpg kee-klamp-40-profile.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
40-5 3/4” 5 1.26” 3.23”
40-6 1” 6 1.46” 3.62”
40-7 1-1/4” 7 1.81” 4.72”
40-8 1-1/2” 8 2.09” 5.35”
40-9 2” 9 2.44” 6.61”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos