35 - Three Socket Cross Kee Klamp Fitting

(1 review) Write a Review
0.44 LBS
Calculated at Checkout
35 - Three Socket Cross Kee Klamp Fitting

Most frequently used to tie uprights with horizontal pipes in three directions, all at 90° to the upright. The upright passes through the fitting.

kee-klamp-35.jpg kee-klamp-35-profile.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
35-4 1/2" 4 1.34” 2.68”
35-5 3/4" 5 1.61” 3.23”
35-6 1” 6 1.81” 3.62”
35-7 1-1/4” 7 2.36” 4.72”
35-8 1-1/2” 8 2.68” 5.35”
35-9 2” 9 3.35” 6.61”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos

1 Review Hide Reviews Show Reviews

  • 5
    Key Klamp

    Posted by Unknown on 21st May 2014

    The key clamps are just what we need for our dock which is 80 foot long. There are easy to adjust for the changing water levels. Hawkeye prices and delivery service can't be beat.