29 - 30° to 60° Single Socket Tee

(No reviews yet) Write a Review
0.97 LBS
Calculated at Checkout
29 - 30° to 60° Single Socket Tee Kee Klamp Fitting

Designed as an alternative to the Type 12 fitting, this adjustable fitting is most frequently used for bracing and struts. It may be used at any selected angle between 30 and 60 degrees. As an alternative, it is possible to use Type 29 in its vertical position in place of the Type 327, using Type 327 only where a join in the pipe occurs.

29-t.jpg 29-p.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
29-6 1” 6 3.23” 2.52”
29-7 1-1/4” 7 3.66” 2.91”
29-8 1-1/2” 8 4.02” 2.68”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos