26 - Two Socket Cross Kee Klamp Fitting

(No reviews yet) Write a Review
0.31 LBS
Calculated at Checkout
26 - Two Socket Cross Kee Klamp Fitting

Usually paired with Type 25 to give a 90° joint between the middle rail and an intermediate upright on safety railing. The upright passes through the fitting.

kee-klamp-26.jpg kee-klamp-26-profile.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
26-4 1/2" 4 2.68”
26-5 3/4" 5 3.23”
26-6 1” 6 3.62”
26-7 1-1/4” 7 4.72”
26-8 1-1/2” 8 5.35”
26-9 2” 9 6.61”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos