25 - Three Socket Tee Kee Klamp Fitting

$13.87
(No reviews yet) Write a Review
SKU:
25
Weight:
0.40 LBS
Shipping:
Calculated at Checkout
25 - Three Socket Tee Kee Klamp Fitting

Most commonly used as the 90° joint between the top rail and an intermediate upright on safety railing. As there are two socket set screws in the sleeve, this fitting can be used where a join is required in the horizontal pipe. The Type 10 fitting can be used as an alternative when a join in the pipe is not required.

kee-klamp-25.jpg 25-t.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
D E
25-4 1/2" 4 1.34” 2.68”
25-5 3/4" 5 1.61” 3.23”
25-6 1” 6 1.81” 3.62”
25-7 1-1/4” 7 2.36” 4.72”
25-8 1-1/2” 8 2.68” 5.35”
25-9 2” 9 3.35” 6.61”

kee-klamp-pipe-size-new.png

Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos