17 - Clamp-On Crossover Kee Klamp Fitting

(No reviews yet) Write a Review
0.33 LBS
Calculated at Checkout
17 - Clamp-On Crossover Kee Klamp Fitting

Designed to provide a 90° cross-over joint. Can be added to an existing structure. Pipe should not be joined within this fitting. For alternative fitting, see Type 45 or Type A45.

kee-klamp-17.jpg kee-klamp-17-profile.jpg
Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
17-5 3/4" 5 1.06” 1.61”
17-6 1” 6 1.34” 1.89”
17-7 1-1/4” 7 1.69” 2.48”
17-8 1-1/2” 8 1.93” 2.68”
17-9 2” 9 2.40” 3.07”


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos