121 - Corner Crossover Kee Klamp Fitting

(No reviews yet) Write a Review
2.03 LBS
Calculated at Checkout
121 - Corner Crossover Kee Klamp Fitting

This fitting is designed to provide a 90 degree offset corner joint. When calculating the cutting lengths for pipe, dimension 'G' should be subtracted to give the pipe length for the rails and dimension 'H' should be added to give the pipe length for the upright.

Note: To obtain the true height of the upright the allowance for the base fittings must be included.

kee-klamp-121.jpg kee-klamp-121-profile.jpg


Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
121-7 1-1/4” 7 1.81” 2.83” 1.93” .87" .98"


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos