115 - Horizontal Railing Base Kee Klamp Fitting

(No reviews yet) Write a Review
Typically Ships within 1-3 Business Days
2.34 LBS
Calculated at Checkout
115 - Horizontal Railing Base Kee Klamp Fitting

Type 115 is designed for palm fixing of guardrailing and balustrading to walls, parapets, steps, and ramps. The upright cannot drop through the socket. Packer plates Type S115, are available to allow the fitting to be positioned in channels, slots, and other offset areas.

kee-klamp-115.jpg kee-klamp-115-profile.jpg


Fitting Type Bore Size
(Inside of Pipe)
Pipe A
(Schedule 40)
D E F G H J Bolt Hole Dia.
115-6 1” 6 5.91” 3.94” 1.18” 3.54" 2.56" .39" .55"
115-7 1-1/4” 7 5.91” 3.94” 1.38” 3.54" 2.56" .39" .55"
115-8 1-1/2” 8 5.91” 3.94” 1.61” 3.54 2.56" .39" .55"


Pipe For Your Structure

Kee Klamp safety components are produced in a range of standard sizes to suit schedule 40 steel pipe, sizes 1/4" nominal to 2” nominal bore; also equivalent sizes of tubing in other materials.

Tubing of other specifications can be used, providing the outside diameter is compatible with schedule 40 pipe. Pipe with a wall thickness of less than 1/8” can only be used in lightly loaded structure.

A Kee Klamp component (size 5 – 9) can support an axial load of 2,000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. (Rating includes a safety factor of 2:1.) This is normally obtained when the set screw is fully tightened using a ratchet wrench.

Videos Hide Videos Show Videos